- Smart Motion Sensor Lights Indoor: The motion sensor light emits a warm white light, which is soft and bright, making people feel comfortable and relaxing. No more fiddling to find light switch. No more worry about bumping into things whistle getting in or out of bed in the dark.
- USB Rechargeable Night Light: Powered by a built-in rechargeable battery. Take the stick on light down from the metal sheet, and charge it via a USB cable(included) till the Blue indicator lights up. It can be recharged by any USB charging port, like plug, power bank or laptop.
- 3 Lighting Modes: This stick on lights have 2 sensors inside (motion & light), it can detect the movement of people in the dark and automatically turns on within 10ft, automatically turns off when no movement is detected for about 30 seconds. It is also possible to keep it always off/on, depending on your needs.
- Easy to Install: With the included magnet strip and 3M adhesive tape, this motion sensor light could be stick-on anywhere you want.No tools, screws or nuts are required. You can remove the light from the magnet for charging or as a hand-held light.
- Wide Usage & Application: The light is suitable for Indoor Lighting, it can be used as under cupboard lights, sensor night light, cabinet light, closet light, flashlight. Perfect for bedroom,wardrobe,drawer,under cabinets,basement,corridor, garage,bookcase, shelves,kitchen and so on.
Visited 1 times, 1 visit(s) today
Disclaimer Note : This post may contain affiliate links, meaning I get a commission if you decide to purchase through my links, at no cost to you.
Le Birdy –
Alles was man braucht um Abends im Korridor schnell mal Licht zu haben, Hände voll ..zack beim reingehen geht das Licht dank Bewegungssensor an. Ware ist gut Verpackt angekommen.
Der Karton ist so Konzipiert das vorhandenes Zubehör Ordentlich aufbewahrt werden kann.
Die Lampen lassen sich via USBC gut aufladen / die Brenndauer hängt davon ab wie oft sie angehen für meine fälle ist es ordentlich ca. 6 Tage bis neu geladen werden muss USB C (2) Kabel sind dabei .
Eine Ausführliche Bedienungsanleitung ist auch dabei / Mehrsprachig.
An Zubehör ist neben Magnethaltern und Blech Gegenstücken auch die Möglichkeit für einen Haken zu aufhängen gegeben. Hochwertiges Material zum Kleben von Markenhersteller inkl.
Die Lichtausbeute ist sehr gut wie auf den Bildern zu sehen ist.
Würde ich jederzeit wieder Kaufen.
Le Birdy –
La batterie tient bien, les lampes éclairent fort, elles sont top.
craig –
Easy to install. The battery life is great on these. Can’t fault them.
Beetleypete –
Charged up in less than 3 hours, easy to fit with the supplied sticky pads and magnetic plates, this is a really effective ‘no battery’ light for a small area that gives great illumination and does what it claims to do. No complaints from me, and you get two in the pack!
Curtis –
Better than the battery powered options. The charging and magnet attachment means it’s easy to put up and take down to charge.
My only con would be that you can’t adjust the sensitivity on the lights.
OldRoby –
Een perfecte en simpele oplossing om ons sleutelgat iets uit te lichten.
Ook zonder fel groot kamerlicht is het nu simpel om het slot van de deur open of juist dicht te draaien.
3 magneetstrips en dubbelzijdig tape kan ik niet goed plaatsen.
Met 2 lampjes in de verpakking zie ik het nut niet van 3 sets strips maar ok, misschien gewoon 1 voor reserve.
Beste, een van de drie Lampjes reageert niet meer. Krijg ik een nieuw hiervoor? –
Comode, utili e funzionali. Recensisco dopo alcuni mesi dall’acquisto e dopo averne acquistato altra coppia. Vanno più che bene, il sensore è ben tarato sia per la luminosità richiesta per l’accensione, che per il passaggio davanti alla fotocellula. Io li uso in armadio per illuminare l’interno quando di sera o al mattino presto apro con luce spenta in stanza. Luce più che sufficiente e durata batteria buona. Ottimi.
china doll –
I’ve only received these yesterday so I can’t comment on how long they last between charges but I’m very happy with them up to now.
We don’t have a light switch outside our bedroom so it’s either fumbling down the landing in the dark to the Loo or putting the bedroom light on ( not recommended if you don’t want me to get very cross)!!
I’ve put one outside the bedroom and one outside the bathroom and the sensors work perfectly. They stay on for approx. 30 seconds and light up the landing really well. They stuck on easily and hopefully they’ll stay in place, if not, I’ll update my review later.
I’m very happy with these so far.
Arcane –
A simple and neat little lamp which is very handy to have. Works well. I’m very happy with my purchase.
Marc –
Several options for using these lights, ranging from wardrobes, shed, kitchen unit’s and so on. I bought these to place at both ends of my house stairway to illuminate without permanent lights on all the time. They just pop on with the motion activation which works perfectly.
• Battery life lasts around 2-4 days, depending on how much traffic sets them off.
• Charging only takes a couple of hours, 2 x USB/C cables provided.
• Can be switched on/off or motion activated mode
• Soft but sufficiently bright light that easily covers an area of 3-4 metres, depending on obstacles and positioning.
• Double sided stickers and a magnetic strip for each light are included (2 x lights per box)
I affixed a double sided sticker strip directly to a wall and attached a magnetic strip using the tape to each light. This way the light can be removed easily to be recharged. Additionally, I have removed a light from the wall to use as a torch from time to time (very handy)
I intend to buy some more for my shed, loft and under our kitchen units. They will save me a fortune on electricity bills, due to lights being left on all over the house from my wife and daughter being scared of the dark, horror movie buffs 👻
Highly recommended 👌🏻
Albert HR –
As a customer who has used the ANOPU Motion Sensor Lights Indoor, I am providing a review outlining the good and bad aspects of this item.
The good:
1. Motion sensor technology: The ANOPU Motion Sensor Lights are equipped with motion sensors that detect movement in their vicinity. This feature allows the lights to automatically turn on when someone enters the room and turn off when no motion is detected. It provides convenience and energy efficiency by ensuring that the lights are only active when needed.
2. Rechargeable via USB: These lights can be easily recharged using a USB cable. This eliminates the need for frequent battery replacements and reduces waste. The USB charging capability makes it convenient to recharge the lights using a computer, power bank, or any USB power source.
3. Stick-on design: The lights come with adhesive backing, allowing them to be easily attached to various surfaces such as walls, cabinets, or staircases. The stick-on design eliminates the need for drilling or complicated installations, making it a versatile lighting solution for different areas of your home.
4. Multiple lighting modes: The lights offer three lighting modes to suit different needs. These modes typically include a motion-sensing mode, a constant-on mode, and an off mode. The flexibility to choose between these modes enables you to customize the lighting based on your preferences or the specific requirements of the space.
The bad:
1. Limited brightness: Due to their compact size and portable design, the ANOPU Motion Sensor Lights may not provide the same level of brightness as larger, wired lighting fixtures. While they are suitable for illuminating small areas or as accent lighting, they may not be sufficient as the primary light source in larger rooms.
2. Limited battery life: Depending on the specific model and usage, the battery life of these lights may vary. Some customers have reported that the battery life may not be long enough to last throughout the night or for extended periods without recharging. It’s important to consider the expected usage time and ensure that the lights are adequately charged to avoid unexpected darkness.
3. Adhesive quality: The adhesive backing provided with the lights may not always adhere well to certain surfaces or withstand humid environments. In some cases, the lights may detach from the intended location over time. It is recommended to thoroughly clean and dry the surface before applying the adhesive to ensure better adhesion.
In summary, the ANOPU Motion Sensor Lights Indoor offer convenient motion-sensing technology, USB rechargeability, a stick-on design, and multiple lighting modes. They are suitable for small areas and provide flexibility in terms of placement and usage. However, they may have limited brightness, battery life, and the adhesive backing may not adhere well to all surfaces. Despite these limitations, they serve as a practical lighting solution for enhancing convenience and visibility in various indoor spaces.
Lou –
Heel gemakkelijk als je ”s nachts even op moet, gaat alles vanzelf.
Heather –
I have another Motion Sensors brought in Amazon before, but it is not bright enough even my corridor is small. That why I need to buy another one and this one is surprising me! I read the comments and saw some of the photos in review. When I am using it, it is exactly the same as the comment. It is very bright and sensitive to the motion. And most importantly, it is rechargable and not need to recharge frequently. And the price is worth for this good quality.